<?xml version="1.0" encoding="UTF-8"?>
<!--Generated at Mon, 31 Aug 2026 19:58:13 +0200-->
<rss version="2.0">
 <channel>
  <title>[elecena] 133-MHz 48-bit Channel Link deserializer - zmiany ceny</title>
  <description>The DS90CR486 receiver converts eight Low Voltage Differential Signaling (LVDS) data
		streams back into 48 bits of LVCMOS/LVTTL data. Using a 133MHz clock, the data throughput is
		6.384Gbit/s (798Mbytes/s).

	 The multiplexing of data lines provides a substantial cable reduction. Long distance
		parallel single-ended buses typically require a ground wire per active signal (and have very
		limited noise rejection capability). Thus, for a 48-bit wide data and one clock, up to 98
		conductors are required. With this Channel Link chipset as few as 19 conductors (8 data pairs, 1
		clock pair and a minimum of one ground) are needed. This provides an 80% reduction in interconnect
		width, which provides a system cost savings, reduces connector physical size and cost, and reduces
		shielding requirements due to the cables' smaller form factor.

	 The DS90CR486 deserializer is improved over prior generations of Channel Link devices and
		offers higher bandwidth support and longer cable drive with three areas of enhancement. To increase
		bandwidth, the maximum clock rate is increased to 133 MHz and 8 serialized LVDS outputs are
		provided. Cable drive is enhanced with a user selectable pre-emphasis (on DS90CR485) feature that
		provides additional output current during transitions to counteract cable loading effects. Optional
		DC balancing on a cycle-to-cycle basis, is also provided to reduce ISI (Inter-Symbol Interference).
		With pre-emphasis and DC balancing, a low distortion eye-pattern is provided at the receiver end of
		the cable. A cable deskew capability has been added to deskew long cables of pair-to-pair skew.
		These three enhancements allow long cables to be driven.

	 The DS90CR486 is intended to be used with the DS90CR485 Channel Link Serializer. It is
		also backward compatible with serializers DS90CR481 and DS90CR483. The DS90CR486 is footprint
		compatible with the DS90CR484.

	 The chipset is an ideal solution to solve EMI and interconnect size problems for
		high-throughput point-to-point applications.

	 For more details, please refer to the section of this datasheet.</description>
 </channel>
</rss>
