The go-e Charger Gemini flex with a maximum charging power of 11 kW is an intelligent charging station in an elegant design for charging electric vehicles and plug-in hybrids both indoors and outdoors. The wallbox can be installed without an electrician. Via the app, the Charger offers numerous additional convenience functions. The compact size and low weight allow the portable charging station to be used at home, in front of company buildings or while traveling. This makes the Charger a reliable companion even when camping or visiting friends. Simply plug it into a red CEE 16 A socket or via adapter into other sockets and the charging process starts immediately. Please make sure to use suitable original adapters especially for the go-eCharger Gemini flex 11 kW. Product specifications: Dimensions: approx. 15.5 x 26 x 11 cm Weight: approx. 1,63 kg Connection cable: 30 cm + plug, 5 x 2.5 mm² (type H07BQ-F) Connection: single-phase or three-phase Rated voltage: 230/240 V (single-phase) / 400/415 V (three-phase) Rated frequency: 50 Hz Mains types: TT/TN/IT Standby power: 3.1 W (LEDs dark) to 5.2 W (LEDs bright) RFID: 13.56 MHz WLAN: 802.11b/g/n 2.4GHz / frequency band 2412-2472Mhz Charging power: Maximum charging power: 11 kW (16 A 3-phase) Ampere and status display: Readable via LED ring and app Setting of charging power: Via push button and app Charging power adjustable between 1.4 kW and 11 kW depending on the number of phases of the car's onboard charger (via charging current in 1 amp steps between 6 A and 16 A): Single-phase charging car: 1.4 kW to 3.7 kW (country-specific limitations must be observed). Two-phase charging car: 2.8 kW to 7.4 kW (two-phase connection of the charger is not possible) Three-phase charging car: 4.2 kW to 11 kW (go-e Charger switches through the power that is available at the connection) Connection to infrastructure: CEE red 16 A (3-phase) With original go-e adapters (available as accessories): 11 kW Gemini flex to CEE red 32 A (three-phase - limited by charging box to 16 A) 11 kW Gemini flex to CEE blue 16 A (single phase) 11 kW Gemini flex to safety plug 16 A (household socket - single phase) Connection to vehicle: Type 2 socket (according to EN 62196-2) with mechanical interlock (own type 2 cable required, available as accessory) Vehicles with type 1 can be charged with adapter cable type 2 to type 1 (available as accessory) Safety functions: RCD protection module with DC current detection: 20 mA AC, 6 mA DC Anti-theft device: Locking of the charging cable RFID access control: One taught RFID chip included Input voltage: Phase and voltage check Switching functions: Switching function test Ground test: For TT, TN networks (disconnectable ground test for IT network - Norway mode) IP55: Protection against dirt and water, suitable for permanent outdoor operation go-e grid operator API: For authorized access of the power grid operator to the go-e Charger for grid-serving power control Modbus TCP: among other things, for grid-serving power control by the power grid operator App and connectivity: Local (WLAN hotspot), (WLAN) control and monitoring. Adjustment/testing of charge (voltage, current, power, energy). Adjusting current level in 1 amp increments Start/stop function RFID chip/card management (up to 10 users per charger) / access management (RFID/App) Electricity meter (total kWh and total amount per RFID chip) kWh limit mode / Eco mode / Scheduled charging mode Push notifications Cable unlock functions Flexible electricity tariffs with intelligent charging management Static load management Photovoltaic connection via open API interface (programming required) OCPP 1.6 LED adjustment Management of charging levels via push button at charging station Updateable for later functions (Smart Home, etc.) Automatic unlocking of the charging cable in case of power failure 1-/3-phase switching via app - even during the charging process Synchronization of charging processes with the cloud and display of past charging processes Documented public API interfaces: HTTP, MQTT, Modbus TCP -->Caution!<-- If this box is to be permanently installed, it is recommended that an electrician be consulted. If CEE sockets or cables have to be installed or routed, this must be implemented by a specialist. Furthermore, we recommend to involve your network operator in your planning and your project. https://elecena.pl/product/21327635/ch-04-11-01-go-e-charger-gemini-flex-11-kw 2022-07-26 https://elecena.pl/product/21327635/ch-04-11-01-go-e-charger-gemini-flex-11-kw 2023-01-02 https://elecena.pl/product/21327635/ch-04-11-01-go-e-charger-gemini-flex-11-kw 2023-04-17 https://elecena.pl/product/21327635/ch-04-11-01-go-e-charger-gemini-flex-11-kw 2024-03-09 https://elecena.pl/product/21327635/ch-04-11-01-go-e-charger-gemini-flex-11-kw 2024-05-07 https://elecena.pl/product/21327635/ch-04-11-01-go-e-charger-gemini-flex-11-kw 2024-08-07 https://elecena.pl/product/21327635/ch-04-11-01-go-e-charger-gemini-flex-11-kw 2025-02-08 https://elecena.pl/product/21327635/ch-04-11-01-go-e-charger-gemini-flex-11-kw 2025-04-07 https://elecena.pl/product/21327635/ch-04-11-01-go-e-charger-gemini-flex-11-kw 2026-01-16 https://elecena.pl/product/21327635/ch-04-11-01-go-e-charger-gemini-flex-11-kw 2026-07-01