The UPS PIco features a female XHP-2 connector on board for LiPo battery connections. These JST-XHP-2 cable assembles will allow you to connect 3rd party LiPo's to our UPS PIco! They're 70mm long, feature a 22AWG core on each wire, so plenty thick for most battery loads (max. 8A), and terminate in a male JST XHP-2 on both ends. We do not offer warranty on PIco's broken due to the use of a 3rd party batteries disregarding the notes below Important Notes when using 3rd Party LiPo's with the UPS PIco * Check the positive & negative terminals of the LiPo are correct - They are not all the same! * LiPo Charging Voltage must be 4.2 V * C factor should allow battery to provide more than 6A * e.g. 450mA x 15 (C factor) = 6.75A or 3000 mAh x 2 (C factor) = 6A * Larger batteries must have PCM protection installed on battery Features * 2 Pin JST-XHP-2 Assembly (Red/Black) * Current rating: 8A AC, DC (AWG #22) * Voltage rating: 100V AC, DC * 70mm Long * Temperature range: -25?C to +85?C (including temperature rise in applying electrical current) * Contact resistance: Initial value/10m ? max. After environmental testing/20m ? max. * Insulation resistance: 1,000M ? min. * Withstanding voltage: 800V AC/minute Downloads Datasheet https://elecena.pl/product/22717593/ups-pico-jst-xhp-2-battery-connector-2-wire 2023-03-07 https://elecena.pl/product/22717593/ups-pico-jst-xhp-2-battery-connector-2-wire 2023-12-27 https://elecena.pl/product/22717593/ups-pico-jst-xhp-2-battery-connector-2-wire 2024-09-19 https://elecena.pl/product/22717593/ups-pico-jst-xhp-2-battery-connector-2-wire 2024-11-29 https://elecena.pl/product/22717593/ups-pico-jst-xhp-2-battery-connector-2-wire 2024-11-30 https://elecena.pl/product/22717593/ups-pico-jst-xhp-2-battery-connector-2-wire 2025-11-28 https://elecena.pl/product/22717593/ups-pico-jst-xhp-2-battery-connector-2-wire 2025-11-29