This SIM7600X (SIM7600G-H) 4G Module is a multi-band support communication module that is compatible with 4G, 3G and 2G networks. With its GNSS positioning supporting GPS, BeiDou, Glonass, GALILEO, QZSS, and LBS base station positioning, you'll get highly accurate geolocation information relayed to the module. For ease of use, this module comes with the SMA main antenna, and the pin header already soldered on for you. This is compatible with a range of development boards, including Raspberry Pi, Raspberry Pi Pico, Arduino, and many more! It supports many communication protocols including SMS, TCP, UDP, MQTT, DTMF, HTTP, and FTP. A USB-C port for power, a Nano SIM port, and with its small size for easy integration, this module can be used for a wide variety of projects and is easy to use. Features * Compatible with 2G/3G/4G network * Supports dial-up, telephone calls, SMS, TCP, UDP, MQTT, DTMF, HTTP, and FTP * Supports GPS, BeiDou, Glonass, GALILEO, QZSS, and LBS base station positioning * Onboard USB and UART interface, for dial-up internet access, cloud platform communication, and GNSS positioning. * Castellated holes with immersion gold design, small size, easy to integrate into the device by soldering directly or inserting via the pin header * Adapting USB/UART/SIM card/GPIO control pins, easy to develop and debug, better expansibility * Built in voltage translator, compatible with 3.3V/5V MCU motherboards such as STM32/ESP32/Arduino * Supports multiple power supply methods: USB port, VIN pin, and VBAT pin (for 3.7V lithium battery) * Onboard multiple protection circuits: TVS protection for SIM card, power supply isolation between the USB port and pin header, VIN pin power supply * anti-reverse, and so on, more safe and reliable * 2x LED indicators, easy to monitor the operating status * Adopts SIMCOM recommended power supply solution, supports 5~26V wide voltage power supply and 3A high current output, to prevent the module * from dropping and restarting due to the large instantaneous power consumption, more stable and reliable in industrial use. * Onboard Nano SIM card slot, supports 1.8V and 3V SIM cards, near the edge of the board design, for easy accessing SIM card * Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) * Adapting 3-channel antenna connector, IPEX antenna connector version and SMA connector version optional, supports mass customization What's on Board Specifications Model SIM7600G-H Applicable Regions Global Operating Frequency LTE Cat-4 LTE-FDD：B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66 LTE-TDD：B34/B38/B39/B40/B41 3G UMTS/HSDPA/HSPA+：B1/B2/B4/B5/B6/B8/B19 2G GSM/GPRS/EDGE：850/900/1800/1900 MHz GNSS GPS/Beidou/GLONASS/GALILEO/QZSS GNSS Parameter Receiver 16-channel C/A Code Sensity 0 Cold starts: -148 dBm Time-To-First-Fix (open air) Cold starts: <35s Hot starts: <1s Software Feature Network Protocol TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/DNS Internet Access PPP/NDIS/RNDIS USB Driver Windows XP/7/8/10/11, Linux (driver free on Raspberry Pi Raspbian system) SMS Supported types: MT, MO, CB, Text, PDU Hardware Interface USB Interface Access PC/Raspberry Pi/Jetson Nano and other hosts for 4G networking, positioning, AT command sending and receiving test, firmware upgrade, etc. UART Interface MCU for 4G networking, positioning, AT command sending and receiving test, etc., compatible with 3.3V/5V working level. SIM Card Slot Onboard Nano SIM card slot, adapting related pins, compatible with 1.8V and 3V SIM cards. Other Interfaces GPIO, PWR, RST, FLT. Antenna Connectors MAIN: 4G main antenna (optional SMA connector or IPEX 1 connector version) AUX: 4G auxiliary antenna (IPEX 1 connector by default, can be mass-customized as SMA connector) GNSS: Positioning antenna (IPEX 1 connector by default, can be mass-customized as SMA connector). Indicator PWR: Power indicator NET: Network indicator Other Parameters Power Supply USB port or VBUS - GND pin: 5V power supply VIN - GND pin: 5V~26V wide-range voltage power supply BAT - GND pin: 3.7V lithium battery power supply Operating Voltage 3.3V by default (configurable as 3.8V-5V via VIO pin by connecting external voltage) Operating Temperature -30°C ~ 80°C Storage Temperature -45°C ~ 90°C Dimensions 38.8mm x 42mm Resources * Product Wiki Pinout Package Contents * 1x SIM7600X 4G Module pre-soldered version * 1x 4G antenna https://elecena.pl/product/23268663/sim7600x-4g-communication-module 2023-04-21 https://elecena.pl/product/23268663/sim7600x-4g-communication-module 2023-05-24 https://elecena.pl/product/23268663/sim7600x-4g-communication-module 2023-12-27 https://elecena.pl/product/23268663/sim7600x-4g-communication-module 2024-09-18 https://elecena.pl/product/23268663/sim7600x-4g-communication-module 2024-11-29 https://elecena.pl/product/23268663/sim7600x-4g-communication-module 2024-11-30 https://elecena.pl/product/23268663/sim7600x-4g-communication-module 2025-02-13 https://elecena.pl/product/23268663/sim7600x-4g-communication-module 2025-08-06 https://elecena.pl/product/23268663/sim7600x-4g-communication-module 2025-11-28 https://elecena.pl/product/23268663/sim7600x-4g-communication-module 2025-11-29 https://elecena.pl/product/23268663/sim7600x-4g-communication-module 2026-03-15