52Pi M.2 NVME SSD USB Adapter for Raspberry Pi 5

The 52Pi N06 M.2 NVME SSD USB Adapter is a compact USB storage expansion board for Raspberry Pi 5. It allows direct connection of M.2 NVMe SSDs via a USB 3.0 interface, supporting 2230, 2242, 2260, and 2280 drive sizes - such as the Raspberry Pi SSD. Designed to mount underneath the Raspberry Pi, it keeps your setup clean with no need for extra cabling or system modifications. Unlike PCIe-based SSD solutions, this adapter uses USB 3.0 to handle both power and data over a single connection. While PCIe offers higher raw throughput, using USB offers key advantages for certain use cases - such as hot-swapping, simplified power management, or when running OS images from USB without altering the Pi’s PCIe setup. For many applications, the 5 Gbps USB 3.0 bandwidth is more than sufficient; however, if you're after PCIe speeds, check out our SSD HAT section for a great range of options to choose from. This board is plug-and-play with the Raspberry Pi 5 and doesn’t require additional drivers. It supports NVMe SSD capacities up to 4TB (depending on the drive used) and operates within a standard 0–70°C range. This adapter only supports NVMe protocol SSDs and is intended for use with the included USB converter only. Raspberry Pi and SSD not included.

Features

* Compact USB storage expansion board for Raspberry Pi 5

* Connects M.2 NVMe SSDs via USB 3.0 interface

* Supports 2230 / 2242 / 2260 / 2280 M.2 NVMe drive sizes

* Mounts underneath the Raspberry Pi for a tidy setup

* USB 3.0 handles both power and data – no extra cabling required

* Plug-and-play with no drivers or system changes needed

* Ideal for hot-swapping, USB boot setups, and simplified power management

* Supports SSD capacities up to 4TB (drive dependent)

* Operating temperature: 0°C to 70°C

* Note: NVMe SSDs only. For PCIe options, see our SSD HAT section

* Includes USB converter – Raspberry Pi and SSD not included

Specifications

Form Factor M.2 NVMe SSD Adapter

Interface

USB 3.0 Type-A to M.2

SSD Sizes Supported 2230, 2242, 2260, 2280

Data Transfer Rate Up to the maximum speed supported by USB 3.0 (5 Gbps)

Operating Temperature 0°C to 70°C (32°F to 158°F)

Storage Capacity Varies depending on the SSD used (up to 4TB as per current SSD offerings)

Power Requirements Powered through USB 3.0 connection

Resources

* Product Wiki

* Assembly

Package Contents

* 1x N06 M.2 NVME SSD USB Adapter

* 1x USB 3.0 Connector

* Standoffs and fixings

* 1x Screwdriver

Raspberry Pi and SSD not included.