Add a compact IPS touch screen display to your Raspberry Pi project - without blocking your GPIO header - with this clever option from Waveshare! The display makes use of pogo pins to connect to GPIO pins from the underside of your Raspberry Pi, ensuring you can continue using most HATs and coolers without restriction. It's a 3.5" IPS panel with a 320x480 resolution and 170° viewing angles, offering 262K colours and controlled via SPI. It offers 5-point capacitive touch with toughened glass. Whilst this is primarily designed for mounting a Raspberry Pi 5, 4 or Zero, you can also use this display with other development boards thanks to the 13-pin connector on the rear, and the included assembly cable. The Waveshare wiki provides setup options for Raspberry Pi and ESP32-S3 - other dev boards and platforms may work, but you'll need to write your own code for these (datasheets available here). Raspberry Pi not included. Features * 3.5" IPS touch display for Raspberry Pi * Compatible with Raspberry Pi 5, 4, Zero * Also compatible with ESP32-S3 dev boards * 320 × 480 resolution and 262K colours * 170° viewing angles * 60Hz refresh rate for smooth visuals * 5-point capacitive touch with toughened glass * High transmittance touch panel with fast response * ST7796S display driver (SPI) and GT911 touch controller (I2C) to reduce GPIO usage * Pogo pin connection mounts under the Raspberry Pi without blocking the GPIO header * 13-pin GH1.25 connector for use with other development boards (cable included) * Immersion gold PCB finish for improved durability and appearance * Online documentation and example code available Specifications Operating voltage 5V Logic level 3.3V Display driver ST7796S Touch driver GT911 Display interface 4-wire SPI Touch interface I2C Display panel IPS Display size 3.5" Touch type Capacitive Touch points 5-point touch Display size 49.36 × 73.84mm Touch panel size 61.00 × 92.44mm Resources * Product wiki Pinout Pin Description 13-pin pin no. TPRST Touch panel reset pin, low active 1 TPINT Touch panel interrupt pin 2 TPSCL Touch panel clock pin 3 TPSDA Touch panel data pin 4 LCDBL LCD backlight pin 5 LCDRST LCD reset pin, low active 6 LCDDC LCD data/command selection (high for data, low for command) 7 LCDCS LCD chip selection, low active 8 SCLK SPI clock pin 9 MOSI SPI MOSI pin 10 MISO SPI MISO pin 11 GND Ground 12 VCC 5V power input 13 Package Contents * 1x 3.5" Capacitive Touch Display (F) for Raspberry Pi * 1x 13-pin GH1.25 cable assembly * 1x Screw pack Raspberry Pi not included.