The ADXL362 is an ultralow power, 3-axis MEMS accelerometer that consumes less than 2 μA at a 100 Hz output data rate and 270 nA when in motion triggered wake-up mode. Unlike accelerometers that use power duty cycling to achieve low power consumption, the ADXL362 does not alias input signals by undersampling; it samples the full bandwidth of the sensor at all data rates. The ADXL362 always provides 12-bit output resolution; 8-bit formatted data is also provided for more efficient single-byte transfers when a lower resolution is sufficient. Measurement ranges of ±2 g, ±4 g, and ±8 g are available, with a resolution of 1 mg/LSB on the ±2 g range. For applications where a noise level lower than the normal 550 μg/√Hz of the ADXL362 is desired, either of two lower noise modes (down to 175 μg/√Hz typical) can be selected at minimal increase in supply current. In addition to its ultralow power consumption, the ADXL362 has many features to enable true system level power reduction. It includes a deep multimode output FIFO, a built-in micropower temperature sensor, and several activity detection modes including adjustable threshold sleep and wake-up operation that can run as low as 270 nA at a 6 Hz (approximate) measurement rate. A pin output is provided to directly control an external switch when activity is detected, if desired. In addition, the ADXL362 has provisions for external control of sampling time and/or an external clock. The ADXL362 operates on a wide 1.6 V to 3.5 V supply range, and can interface, if necessary, to a host operating on a separate, lower supply voltage. The ADXL362 is available in a 3 mm × 3.25 mm × 1.06 mm package. APPLICATIONS * Hearing aids * Home healthcare devices * Motion enabled power save switches * Wireless sensors * Motion enabled metering devices * Ultralow power * Power can be derived from coin cell battery * 1.8 μA at 100 Hz ODR, 2.0 V supply * 3.0 μA at 400 Hz ODR, 2.0 V supply * 270 nA motion activated wake-up mode * 10 nA standby current * High resolution: 1 mg/LSB * Built-in features for system-level power savings: * Adjustable threshold sleep/wake modes for motion activation * Autonomous interrupt processing, without need for microcontroller intervention, to allow the rest of the system to be turned off completely * Deep embedded FIFO minimizes host processor load * Awake state output enables implementation of standalone, motion activated switch https://elecena.pl/product/3860062/micropower-3-axis-2-4-8-digital-output-mems-accelerometer 2012-12-23 https://elecena.pl/product/3860062/micropower-3-axis-2-4-8-digital-output-mems-accelerometer 2015-02-13 https://elecena.pl/product/3860062/micropower-3-axis-2-4-8-digital-output-mems-accelerometer 2025-01-21