Wattmeter - Power Meter - Voltage Current Meter PV

AC CURRENT AND VOLTAGE METER WITH A WATTMETER

e.g. for measuring the operating parameters of photovoltaic panels

New larger version with a clearer 4-in-1 display also with backlight. For use in cars, boats, motorcycles and for voltage and current testing devices. Widely used in electromechanical devices. It allows you to monitor the battery and the electrical system, solar energy, wind energy, HHO installation.

Specification:

Measurement and monitoring of electrical parameters (voltage, current, kWh, watts)

Overload alarm function (exceeding the power alarm threshold, the backlight flashes)

Programming of the alarm threshold function (you can set your own power alarm threshold)

Power (kWh) Function with reset button

Data storage after power off

Screen function - large LCD screen Full smooth display (voltage, current, kWh, power)

Backlight function

Technical data:

Working voltage: 80 - 260VAC

Test voltage: 80 - 260VAC

Rated power: 100A / 22000W

Working frequency: 45-65Hz

Display type: - LCD display with backlight

Measurement precision: Class 1 (± 1%)

Display:

The display interface is a large LCD screen which displays voltage, current, power and energy parameters at the same time.

Power: measuring range 0 ~ 22kW

less than 1kW Displayed format: 0.0 ~ 999.9W

From 1 - 10kW displayed format: 1000 ~ 9999W

10kW and more displayed format: 0.1 ~ 22.0kW

KWh: measurement range 0 ~ 9999kWh

less than 10kWh Displayed format: 0 ~ 9999Wh

10KWh and more Displayed format: 10 ~ 9999kWh

Voltage range: 80-260V

displayed format: 80 ~ 260V

Current range: 0 ~ 100A

Displayed format: 0.00 ~ 99.99A

Button functions:

backlight control - you can turn on / off the backlight by pressing briefly

Power reset

Step 1: long press the button (about 5 seconds) until the display flashes, then release the button;

Step 2: For a short moment, press the button again, then reset to zero (kWh) after flickering;

Step 3: When long press the button for 5 seconds until there is no more flickering, power (kWh) data is not cleared.

Alarm setting (power)

Step 1: Keep holding the button until "SET CLr" is displayed on the LCD screen, then release the button.

Step 2: Power window displays the current value set for alarm and the last digit starts flashing, then you can short press to add 1, when there is no operation for 3 seconds, the digit position will be set automatically

Step 3: Long press the button (time about 5 seconds) will save the value automatically and exit, rated power range 0.0 ~ 22.0kW

Note: Please make sure to connect the wires correctly (polarity)

This module is not suitable for outdoor use.

The connected load cannot exceed the permissible supply voltage and rated current supported by the meter.

APPLICATION:

The panel meter can be used to measure the operating parameters of panels or other electrical devices.

The readable display allows for the analysis of e.g. the battery charging process or the power consumption by AC receivers. Also for measuring parameter differences between photovoltaic panels.