64x32 RGB LED Matrix - 6mm pitch

The 64x32 RGB LED Matrix Panel (6mm pitch) is a bright, full-colour display with 2048 LEDs arranged in a 64x32 grid. Ideal for signs and animations, it connects easily to a Raspberry Pi or Arduino Mega and runs on a 5V power supply.

Bring a little bit of Times Square into your home with this sweet 64x32 square RGB LED matrix panel. These panels are normally used to make video walls. In New York, we see them on the sides of buses and bus stops, to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory. This version is the 6mm pitch 64x32 RGB LED Matrix. Please note, you cannot use an Arduino UNO to drive this size, it's way too big! Use an Arduino Mega, Raspberry Pi, BBB or other device that can handle displaying to RGB matricies and has plenty of RAM. This is a lot like our 6mm Grid 32x32 RGB LED matrix panel, but it's twice as wide and looks superb from far way. If you are looking for a 64x32 matrix, but at a closer view range, check out our 3mm pitch, 4mm pitch, or 5mm pitch 64x32 RGB LED Matrices. This matrix has 2048 bright RGB LEDs arranged in a 64x32 grid on the front. On the back there are two IDC connectors (one input, one output: in theory you can chain these together) and 12 16-bit latches that allow you to drive the display with a 1:16 scan rate. These displays are technically 'chainable' - connect one output to the next input - but our Arduino example code does not support this (yet). These panels require 13 digital pins (6 bit data, 7 bit control) and a good 5V supply, up to 4A per panel. We suggest our 4A regulated 5V adapter and then connecting a 2.1mm jack. Please check out our tutorial for more details! Features

* Panel weight with IDC cables and power cables: 544.31g

* 5V regulated power input, 4A max (with all LEDs on)

* Compatible with M3 mounting screws

* 5V logic level

* 1/16 scan rate

* Indoor display, 160 degree visibility

* Displays are 'chainable'

* Please note:

* There's a lot of LEDs! You may need up to 4A per panel. We suggest our 4A regulated 5V adapter and then connecting a 2.1mm jack. Please check out our tutorials for more details!

* These displays require 13 GPIO pins to control. You may have to use consecutive or special pins, depending on the driver firmware. We'll be honest: folks who try to wire directly are usually not successful, it's easy to get confused and mis connect. For that reason, we strongly recommend a ready-to-go board or adapter that makes wiring as easy as plugging in the cables and powering with 5V.

Specifications

* Dimensions: 385mm x 190mm x 13mm

* Please note

* The back of the matrix will either be green or black

* This product may come with one or two power connections

* There may be a short coupling data cable installed in the centre

Revision History

* As of December 2, 2020 we no longer include mounting screws or magnets.

Package Contents

* 1x 64x32 RGB panel

* 1x IDC cable

* 1x plug in power cable