RGB LED Module (Unassembled Kit) [Discontinued]

This Arduino-compatible module uses three TI TLC5940 PWM LED chips to drive a 4x4 array of RGB LEDs. Each color is controlled by a different chip so you can adjust the reference resistors for the appropriate current. The TLC5940 chips are not directly connected to any Arduino pins, but a header is provided for you to make a manual connection depending on the needs of your sketch. Up to 16 of these modules can be serially connected to make a fantastic LED wall or a LED circle. It can be directly connected with Arduino via F/M cables. If you want ,you can also connect it to Interface shield through an IDC2x5 cables,and then plug the Interface shield to Arduino. NOTE: This is a Un-assembled Kit, you need soldering skill to assemble it. A tutorial is available as a reference.

If you feel the assignment of the leds is not good enough, you could assign the LEDs in a custom pattern by wiring to the LED driving holes.

Specification

* Supply Power:DC 5v

* RGB LED: common anode

* IDC2x5 Serial Data Interface

* 4x4 array of RGB LEDs

* TLC5940 LED driver

* 16 Channels RGB LED with PWM control

* Size:78x45x12mm (3x1.8x0.5'')

* Interface:

* D13(SCK) TLC5940 SCLK

* D10(SS) TLC5940 BLANK

* D11(MOSI) TLC5940 SIN

* D9 TLC5940 XLAT

* D3 TLC5940 GSCLK

Documents

* Product Wiki page

* Soldering tutorial

* TLC5940 sample codes

* TLC5940 DataSheet

* Arduino library(contains simple code)

* Schematics

Shipping List

* RGB Module PCB board x1

* RGB LEDs x16

* IDC10 Interface x1

* TLC5940NT chips x3

* DIP28 socket x3

* Jumper cap x1

* 20pin row needles x1