7" DSI Capacitive Touch Display with 5MP Camera for Raspberry Pi (800x480)

This 7" DSI display for the Raspberry Pi comes with a front built-in 5MP OV5647 camera module which can be used with the same commands as the official Raspberry Pi camera module. The display is a 7" panel offering up to 5-point capacitive touch (OS dependant) and 800x480 resolution. The screen connects to your Raspberry Pi via the same DSI ribbon cable and 5V/GND jumper wire method as the official Raspberry Pi display. This leaves the majority of your GPIO pins free for your project. The display backlight can be adjusted via software/touch and the generous outer bezel also makes this a great option for integrating into your project enclosure. The included camera module connects to your CSI port via the included ribbon cable and uses a 5MP OV5647 sensor which can shoot images up to 2592x1944 and videos up to 1920x1080P @30FPS (full specs below). The display comes with fixings, ribbon cables and jumper wires. The online Wiki provides instructions on how to set up and configure the display. Features

* 7" DSI display for Raspberry Pi

* Supports Raspberry Pi OS driver-free

* Compatible with Raspberry Pi boards with a DSI connector - Raspberry Pi 4, 3B+, 3A+, 3

* 800x480 resolution

* 5-point capacitive touch

* 5MP OV5647 Camera

* CSI interface, supports 1920x1080p@30, 1280x720p@60, 640×480p@60, 640×480p@90

* I2C touch port

* Toughened glass panel

* Supports backlight adjustment via software

* DSI interface, refresh rate up to 60Hz

* Low power consumption

Connection Example

Specifications - Display

* 7" Display

* 800x480 Resolution

* DSI interface

* 5-point capacitive touch

* Toughened glass

* Dimensions: 192.96mm x 110.76mm

Specifications - Camera

* Sensor: OV5647

* Pixels: 5MP

* Focal length: 3.89mm

* Distortion: < 1.5%

* CMOS size: 1/4"

* Aperture: F2.4

* Diagonal FoV: 72.9°

* Depth of Field: ~20cm

* Image: 2592 × 1944 still image resolution

* Video: 1920×1080p @30, 1280×720p @60, 640×480p @60, 640×480p @90

Package Contents

* 1x 7" DSI LCD

* 2x FPC 15PIN 1.0 pitch 50mm (opposite sides)

* 1x FPC 15PIN 1.0 pitch 120mm (opposite sides)

* 1x 2-pin GPIO wire (10cm)

* 1x Screws pack

Raspberry Pi not included Resources

* Product Wiki