Maker Nano RP2040

The Maker Nano RP2040 has the same form-factor as the popular Arduino Nano but is powered by the much more powerful RP2040 from Raspberry Pi. This also means it's compatible with most of the shields available for the Arduino Nano. It's also breadboard-friendly allowing you to prototype your circuit with ease. The board also includes some great onboard features such as IO indicator LEDs, 2x Neopixel-compatible RGB LEDs, piezo buzzer, a programmable button and two ports compatible with Qwiic, STEMMA and Grove (via included conversation cable). Note: The IO voltage is 3.3V and it's not 5V compatible. There are only four ADC inputs (A0 - A3) on the Maker Nano RP2040 compared to the eight on the Arduino Nano. Simplifying Digital Making Just like the other Maker series products, there are plentiful LEDs on the Maker Nano RP2040 (well, who doesn't like LEDs?). Those LEDs are not just for a nice visual effect, they also represent the status of each pin and this makes troubleshooting your circuit a breeze. Not too excited about the single-colour blue LEDs? Worry not! Cytron has also put in two RGB LEDs (WS2812 Neopixel-compatible) to add more colour to your project. You can also program them to dance together with the melody produced by the onboard piezo buzzer. To change to another melody, press the onboard push button. If something goes wrong with your code and the buzzer keeps playing, mute it with the sliding switch. All of these can be done with the Maker Nano RP2040 alone without additional circuitry. Wiring up your own circuit is always the most tedious part of learning electronics. It's prone to error and sometimes not reversible. We know it because we've gone through that before many times! When the onboard peripherals are not enough for you, additional sensors or modules can be added via the newly introduced Maker Ports. Utilizing the popular JST-SH 4-way connector, Maker Ports are compatible with Sparkfun Qwiic modules and Adafruit STEMMA QT modules. Qwiic and STEMMA QT use I2C communications and can be daisy-chained. By using the included JST-SH to Grove conversion cables, Maker Ports are compatible with Seeed Grove modules too. Maker Ports also support UART (Maker Port 0 only), Analog Input (Maker Port 1 only) and Digital Input/Output. One Board, Multiple Programming Languages The Raspberry Pi RP2040 can be programmed with C/C++ (Natively or with Arduino IDE support), MicroPython or CircuitPython. With massive libraries support and examples especially in Arduino IDE and CircuitPython, you will be ready to build your application in no time, be it for learning purposes or for building a useful project. Features

* Arduino Nano form factor

* Powered by Raspberry Pi RP2040

* Dual-core Arm Cortex-M0+ processor

* 264KB internal RAM

* 2MB of Flash memory

* Same specifications with Raspberry Pi Pico

* 14x Status indicator LEDs for GPIOs

* 1x Piezo buzzer with mute switch

* 1x Pushbutton

* 2x RGB LEDs (WS2812 Neopixel)

* 2x Maker Ports, compatible with Qwiic, STEMMA QT, Grove (via conversion cable)

* Support Arduino IDE, CircuitPython and MicroPython

* Dimensions: 49.53mm x 21.08mm

Maker Nano Model Comparison You may have already seen the original Maker Nano in the store. This table shows the differences between the boards:

Features Maker Nano Maker Nano RP2040

Microcontroller ATmega328P RP2040

Language Arduino IDE (C/C++) Arduino IDE (C/C++) Micropython CircuitPython

Operating Voltage 5V 3.3V

Digital I/O Pins 20 22

PWM 6 14 (Reassignable Pin)

Analog Input 8 (10-bit) 4 (12-bit)

UART 1 2 (Reassignable Pin)

SPI 1 2 (Reassignable Pin)

I2C 1 2 (Reassignable Pin)

External Interrupt 2 22 (All GPIO)

Flash Memory 32KB 2MB

SRAM 2KB 264KB

EEPROM/Data Flash 1KB -

Clock Speed 16MHz 125MHz (Default)

Power Supply Vin or USB Vin or USB

Vin Voltage 7 30V 7-30V

USB Support USB to Serial (CH340C) USB host and device

Programmable LED 12x at Pin D2-D13 14x at Pin DO-D9, D16-D18

Programmable Button 1x at Pin D2 1x at Pin D20

Piezo Buzzer 1x at Pin D8 1x at Pin D22

RGB LED - 2x at Pin D11

Maker Port - 2

Dimension 45.8 X 21.1mm 49.6 X 21.1mm

Package Contents

* 1 x Maker Nano RP2040

* 2 x Grove to JST-SH (Qwiic / STEMMA QT) Cable

Resources

* Maker Nano RP2040 Pinout Diagram

* Maker Nano RP2040 Datasheet

* 3D CAD