1.32" OLED Display Module (128x96)

This OLED module is great for adding a small display to your project, with enough room for info from your robot, 3D printer, API or other data source. The display is 1.32" diagonal, with 128x96 pixels and an embedded SSD1327 controller offering both a 4-wire SPI and I2C interface for maximum compatibility. The display comes with a matching 7-pin cable for connecting to your microcontroller of choice. Raspberry Pi, Arduino and STM32 examples are provided in the online wiki. Note: the display ships with 4-wire SPI mode enabled by default. Changing the mode to I2C, or changing the address, requires careful desoldering and movement of the small SMT resistors on the rear (not for beginners!). If you need I2C and you aren't handy with SMT soldering, we suggest opting for a dedicated I2C OLED module instead. Connection Example - Raspberry Pi (SPI)

Connection Example - Arduino (SPI)

Features

* 1.32" OLED display

* Ultra-narrow bezel

* Compact size

* Onboard voltage translator

* 4-wire SPI (default) and I2C interfaces (setting to I2C requires SMT soldering)

* Online development resources (examples for Raspberry Pi/Arduino/STM32)

Specifications

Operating Voltage 3.3V / 5V

Resolution 128 x 96 pixels

Communication Interface 4-wire SPI / I2C

Display Size 26.86 x 20.14mm

Display Panel OLED

Pixel Size 0.19 x 0.19mm

Driver SSD1327

Module Size 34.30 x 30.50mm

Resources

* Product Wiki

Pinout

RES Reset, low active

DC Data/Command selection (high for data, low for command)

CS Chip selection, low active

CLK Clock input

DIN Data input

GND Ground

VCC Power (3.3V / 5V input)

Package Contents

* 1x 1.32" OLED Module

* 1x GH1.25 7-pin cable