PR100323 RevPi MIO - Analog and digital I/O module

With this expansion module you can connect both analog and digital sensors and actuators to your Revolution Pi system.

In addition to the dedicated digital and analog I/O expansion modules, there is also an I/O module for the Revolution Pi that has both digital inputs/outputs and analog inputs/outputs. The RevPi MIO adds 8 analog inputs, 8 analog outputs and 4 digital channels to the Revolution Pi system. The digital channels can be individually configured via software as either digital inputs or digital outputs. Like all I/O modules, the RevPi MIO is protected against interference according to the EN 61131-2 standard and can be operated at -20 °C to +55 °C ambient temperature.

Analog inputs and outputs The 8 analog inputs and 8 analog outputs can be connected via the 28-pin terminal connector on the front of the module. Both the inputs and the outputs operate with 0 - 10 V. Variable switching thresholds allow the analog inputs to behave like digital inputs. The switching thresholds can be set for each channel. Each analog input is high impedance with a 100 kO input impedance and has a hardware filter with a cutoff frequency of 1.5 kHz. Additionally, each input is protected against ESD pulses by a protection diode.

The analog outputs can also be configured to output a constant, predefined voltage. This allows the analog outputs to be used like digital outputs and logic levels up to 10 V can be used.

Digital inputs and outputs In addition to the analog inputs and outputs, the RevPi MIO also has 4 digital channels. Each channel can be configured as either a digital input or a digital output using the Revolution Pi configuration tool, PiCtory. In addition, the following operating modes can be set: PWM input, pulse measurements, GPI 24 V, PWM output, pulse output & GPO 24 V level output.

Compatible with: RevPi Connect 4, RevPi Connect S, RevPi Connect SE, RevPi Connect+, RevPi Connect, RevPi Core S, RevPi Core SE, RevPi Core 3+, RevPi Core 3, RevPi Core