0.8 Inch 16 Segment LED White - Common Anode

This is a 16 segment common cathode LED and is white. The advantage of 16 segment is that you can not only display 1234567890, but also ABCDEFGHIJKLM. It is compatible with bread board and can work with Arduino by adding some current limiting resistors. So, it Suitable for people who is newbie of electronic. Note: It just a segment LED without control chip. Features High Light low current low-voltage low energy Longevity IC-compatible Specification 0.80 inch common port: 11 size: 20.0 x 27.7 x 8.5mm Colors: white surface colors: Black Working temperature: -20~60°C Mechanical Outline： Unspecified Tolerances is: X±0.2 Absolute Maximum Ratings Parameter Symbol Maximum Rating Unit Power Dissipation Pd - mW Peak Forward Current Ifp 150 mA Continuous Forward Current Ifm 20 mA Reverse Voltage VR 5 V Operating Temperature Range topr -40 → +85 ℃ Storage Temperature Range Tstg -40 → +100 ℃ Static Voltage Var - V * Lead Sodering Temperature：260℃ for 3 seconds * For operation above 25℃, The Ifm Ifp & Pd must be derated, the Curent derating is –0.36mA/℃ for DC drive and -0.86mA/℃ for Pulse drive, the power dissipation is -0.75mW/℃. The product working current must not more than the 60% of the Ifm or Ifp according to the working temperature. Optical-Electrical Characteristic Parameter Test CONDITING Symbol Min Type Max Unit Luminous Intensity IF=10mA Iv 80.5 85.5 89.7 Mcd Forward Voltage IF=10mA VF - 3.0 - V REVERSE Current VR = 5V IR - 80 uA Peak Wavelength IF=10mA λp 461.3 465.2 468.7 nm Spectral Bandwidth IF=10mA △λ - 40 - nm View Angle IF=10mA 2θ1/2 - - Deg. Storage & Soldering Condions: Store with care. Storing the units in bad condition will cause the reflector sheet and decrease it’s adhesive power. Storage the products under the condition :temperature ( 25℃ ± 10℃ ) and humidity (65℃ CRH±20℃ CRH) our recommendation. The Soldering Temperature is 260±5℃ and Soldering Time should be less than 3 sec, and soldering iron power should be less than 30W. The soldering point should be farther than 1.6mm from boby. For any technical support or suggestion, please kindly go to our forum.