ESP32-S3 1.47" IPS LCD Display Dev Board (172x320)

It's another compact display development board from Waveshare! This time with an ESP32-S3 microcontroller, 1.47" display, 6-axis IMU, MicroSD slot and pads to solder a LiPo battery for mobile power! This board is controlled by an ESP32-S3R8 with 8MB PSRAM built-in, supported by 512KB SRAM, 384KB ROM and onboard 16MB FLASH memory. The ESP module offers 2.4GHz Wi-Fi and Bluetooth 5 (LE), with an onboard antenna design. The display is a 1.47" IPS LCD panel with a 172x320 resolution and 262K colours, with RGB lighting underneath it that glows out from the underside not a cool lighting effect. Other neat features include a 6-axis IMU (3-axis accelerometer and 3-axis gyroscope), MicroSD slot for storage, onboard LiPo battery charging (battery not included, and must be connected via soldered pads). A range of GPIO pins are accessible, along with a BOOT and RESET buttons to support software installation, with a USB-C connection for programming and USB power. This product is available with loose headers or with headers pre-soldered to the board, please select an option before adding to your cart. Features

* ESP32-S3 microcontroller

* 2.4GHz Wi-Fi

* Bluetooth 5 LE

* 8MB PSRAM

* 512KB SRAM

* 384KB ROM

* 16MB onboard FLASH

* 1.47" display

* 172x320 resolution

* 262K colours

* RGB lighting underneath the display

* 6-axis IMU

* 3-axis accelerometer

* 3-axis gyroscope

* MicroSD slot

* Onboard antenna

* MicroSD slot

* Onboard LiPo battery charging

* Pads for soldering a LiPo battery (no dedicated connector)

* GPIO access

* BOOT and RESET buttons

* USB-C for programming and power

What's onboard?

* ESP32-S3R8

* Dual-core processor with a running frequency of up to 240 MHz

* 16 MB flash

* RGB LED

* With an onboard clear acrylic sandwich panel for colour-changing effects

* ME6217C33M5G

* Low-dropout regulator with 800 mA max. output

* QMI8658

* 6-axis IMU

* Charging management circuit

* Onboard ceramic antenna

* System battery interface

* For connecting a 3.7 V lithium battery, with charging and discharging support

* MicroSD card slot

* RESET button

* BOOT button

* Type-C interface

* For power supply, USB communication and firmware downloads

LCD Specifications

Display size 1.47"

Resolution 172 × 320 pixels

Display driver ST7789

Colour 262K

Display interface 3-wire SPI

Display panel IPS

Resources ⚠️ Please note, do not remove the screen when soldering the header pins. Tilt the soldering iron at an angle and solder directly!

* Product Wiki

* Schematic

Pinout

Package Contents

* 1x Waveshare ESP32-S3 1.47" IPS LCD Display Dev Board (172x320)

* 2x Header strips (loose or pre-soldered, select an option before adding to cart)