CP2102 EVAL BOARD

Płytka rozwojowa zaprojektowana do pracy z układem CP2102, na płytce dodatkowo został umieszczony układ MAX3232/SP3232 złącza: USB oraz DB9. Płytka może służyć również jako konwerter USB -> RS232. CP2102 features:

* Single-Chip USB to UART Data Transfer

* No external resistors required, no external crystal required

* On-chip power-on reset circuit and voltage regulator

* Integrated 1024-Byte EEPROM

* USB Function Controller

* USB Specification 2.0 compliant; full-speed (12 Mbps)

* USB suspend states supported via SUSPEND pins

* UART

* All handshaking and modem interface signals

* Data formats supported:

* Data bits: 5, 6, 7, and 8

* Stop bits: 1, 1.5, and 2

* Parity: odd, even, no parity

* Baud rates: 300 bps to 1 Mbits

* 576 Byte receive buffer; 640 byte transmit buffer

* Hardware or X-On/X-Off handshaking supported

* Event character support

* Virtual COM Port Device Drivers

* Windows 8/7/Vista/Server 2003/XP/2000

* MAC OS-X/OS-9

* Linux 2.40 or higher

* USBXpress Direct Driver Support

* Windows 7/Vista/Server 2003/XP/2000

* Windows CE

* Temperature Range

* –40 to +85 °C

Features

* Supports Windows 8

* A complete solution for USB TO COM

* Also used as USB TO TTL (disconnect the RXDJMP, TXDJMP, and no RS232 device to be connected)

How to Use In the case of working with a MCU:

* VCC: 5V output

* GND: connects to GND

* TXD: connects to MCU.RX (signal direction: MCU.RX << CP2102 << PC.TX)

* RXD: connects to MCU.TX (signal direction: MCU.TX >> CP2102 >> PC.RX)

* RTS: connects to MCU.CTS (signal direction: MCU.CTS << CP2102 << PC.RTS)

* CTS: connects to MCU.RTS (signal direction: MCU.RTS >> CP2102 >> PC.CTS)

Note: VCP examples and USBXpress driver program library are provided.

Kupując otrzymujesz:

* CP2102 EVAL BOARD × 1

* USB Cable × 1

* Serial Male to Female Cable × 1

* 4-pin wire x 2

* 2-pin wire x 2

* User Guide CD x 1