16-Bit, Isolated, Sigma-Delta ADC

The ADuM7703 is a high performance, second-order, Σ-Δ analog-to-digital converter (ADC) with an integrated low dropout (LDO) regulator that converts an analog input signal into a high speed, single-bit data stream with on-chip digital isolation based on Analog Devices, Inc., iCoupler® technology. The device operates from a 4.5 V to 20 V power supply range (VDD1) and accepts a pseudo differential input signal of ±250 mV (±320 mV full-scale). The pseudo differential input is ideally suited to shunt voltage monitoring in high voltage applications where galvanic isolation is required.

The analog input is continuously sampled by a high performance analog modulator and converted to a ones density digital output stream with a data rate of up to 21 MHz. The original information can be reconstructed with an appropriate sinc3 digital filter to achieve an 86 dB signal-to-noise ratio (SNR) at 78.1 kSPS with a 256 decimation rate and a 20 MHz master clock. The serial input and output operates from a 5 V or a 3.3 V supply (VDD2).

The serial interface is digitally isolated. High speed complementary metal-oxide semiconductor (CMOS) technology, combined with monolithic transformer technology, results in the on-chip isolation providing outstanding performance characteristics, superior to alternatives such as optocoupler devices. The ADuM7703 device is available in a 16-lead, wide-body SOIC with an operating temperature range of −40°C to +125°C and an 8-lead, wide-body SOIC with an operating temperature range of −40°C to +105°C.

Applications

* Shunt current monitoring

* AC motor controls

* Power and solar inverters

* Wind turbine inverters

* Analog-to-digital and optoisolator replacement

* 5 MHz to 21 MHz master clock input frequency

* Offset drift vs. temperature: ±0.6 μV/°C maximum

* SNR: 86 dB typical

* 16 bits, no missing codes

* Full-scale analog input voltage range: ±320 mV

* ENOB: 14 bits typical

* IDD1: 10 mA maximum

* On-board digital isolator

* Operating temperature range

* −40°C to +125°C (16-lead SOICW)

* −40°C to +105°C (8-lead SOICIC)

* 20 V operation on VDD1

* High CMTI: 150 kV/μs minimum, VDD2 = 3.3 V