EM022AS0ONCB Wallbox, 22 KW, LAN+WLAN, 32 A 3PH

With the 3-phase EM2GO EV charging station with 7.5 meter cable and Type 2 plug, you can charge your e-vehicle safely and quickly. The EM2GO Wallbox with Intelligent Control has a variety of communication interfaces such as: Ethernet and WLAN connection for backend and OCPP control, RS-485 to control the wallbox via control protocol, PLC communication interface (in conjunction with charge controller), and RFID control card.

The built-in residual current device (RCD) type B as well as the circuit breaker (MCB) protect against overload before the house fuse is activated. The Smart EM2GO Wallbox is supplied with a 1.5 meter AC mains connection cable for permanent connection to the utility grid as per automotive requirements. For the Ready2plug as well as applications without KFW subsidies e.g. for commercial use etc. a CEE plug is supplied separately. A color display integrated into the glass front informs you about the current charging status, charging voltage, current and power during the charging process. Four LEDs indicate the status of the wallbox and inform about the proper charging process. The EM2GO EV charging station is equipped with intelligent electronics. So your vehicle is well protected against fault current, short circuit and high temperatures. Mounting material for wall mounting is included with the charging station.

Features: Operating voltage: 400V AC ±10% , 50-60 Hz Operating current: 32 Amps Max. Output power: typical 22 kW Phase mode: 3 phases + N + PE Operating temperature: -30 to +55 °C Display: 4.3-inch LCD screen, 4 LED lights Interfaces: RJ-45 (RS485, Ethernet), WLAN (2.4GHz) Connection: Type 2, IEC 62196-2 IEC standards: IEC 61851-1:2017, IEC 62196-2:2016, IEC 60364-7-722:2018 Safety: type B Fi circuit breaker, 32A back-up fuse, emergency stop button, overvoltage protection, overtemperature, over/under voltage, overcurrent, grounding protection. Housing: IP54, splash-proof Dimensions: 410mm × 260mm × 140mm (H×W×D) Weight: 12kg

Online RFID cards for management via OCPP and a waterproof RJ-45 connector are available separately.

-->Caution. If this box is to be permanently installed, it is recommended that an electrician be consulted. If CEE sockets or cables need to be installed or routed, this must be implemented by a professional. Furthermore, we recommend to involve your network operator in your planning and your project.

Promotion of the WALLBOX in Germany: From 24.11.2020, the wallbox will be subsidized as part of the German KfW subsidy program for private charging infrastructure. You must apply to KfW for the subsidy before ordering. The sum of the purchase price for the wallbox and the installation costs must be at least €900.00. Important: Please inform yourself before buying at www.kfw.de, reichelt elektronik GmbH & Co. KG does not assume any costs.