UMFT260EV1A UMFT260EV1A, HID class USB to UART/I2C DIP development module

UMFT260EV1A, HID-class USB to UART/I2C DIP development Module

Introduction: The UMFT260EV1A is a development module for FTDI’s FT260, HID-class USB to UART/I2C Bridge IC. The UMFT260EV1A is ideal for development purposes to quickly prove functionality of adding USB to a target design. The UMFT260EV1A is a module which is designed to plug into a standard 0.8" wide 24 pin DIP socket. The USB connection to a host system is via a Micro USB-B connector. All components used, including the FT260 are Pb-free (RoHS compliant).

Features: The UMFT260EV1A is built with a FT260; many of the features of the FT260 can be utilized with this module. For further details of FT260 features, please refer to the FT260 datasheet, DSFT260, is available at http://www.ftdichip.com/FT260. In addition to the features listed in the FT260 datasheet, the UMFT260EV1A has the following features: - PCB assembly module is designed to fit a standard 20.32mm (0.8") wide 24 pin DIP socket. Pins are on a 2.54mm (0.1") pitch. - An on-board Micro USB-B type connector allows modules to be connected to a host system via a standard USB A to Micro B cable. - On-board I2C 2kbits EEPROM (address:0x50) to contain FT260 configuration settings and vendor specific parameters (I2C pull-high circuit is implemented as default) - Jumpers for selecting the FT260 HID interfaces configuration - Solder jumpers for configuring the FT260Q to be in USB Bus powered or Self powered modes.