Wio Terminal Helium Monitor Kit: plug-and-play hotspot monitor for helium network

This WioHeliumMonitor is a plug-and-play LongFi hotspot monitor for the Helium network. It makes sure the Hotspot is connected to the LAN and has access to the Internet, you will also be alarmed when it is not working correctly through Grove-Wio-E5. Feature Long Range Hotspot Monitoring: this product is to monitor your Helium Hotspot in real-time and remotely. plug-and-play: Compact size makes it easier to bring the device anywhere. Reporting misinformation with APP: WioHeliumMonitor reports information locally and remotely with the Watchium application. Alarm to Remind: any problem detected will raise a local alarm sound. Friendly Interface Display: Directly display network and hotspot information on the Wio Terminal screen. Description This WioHeliumMonitor is a plug-and-play LongFi hotspot monitor for the Helium network. It will tell you if your hotspot is continuously reachable from the local network/LAN connection is working, as well as if your hotspot is continuously accessing the Internet/Internet connection is working correctly. With the Grove-Wio-E5 and an activated Watchium Silver/Gold subscription, you can also verify if your hotspot LoRaWAN communication(including Witness) is operational. In case of Internet/LAN communication problems, it will report the problem over LoRaWAN, while some other hotspots around are able to receive it. What is the Watchium application? WioHeliumMonitor reports information locally and remotely with the Watchium application. An account on the Watchium application is required. A Free Watchium account is good enough for Lan / Internet connection monitoring. The Silver (1HNT) / Gold (3HNT) version is required for the LoRaWan listed options. This option includes all the LoRaWan communications. About Wio Terminal Wio Terminal is compatible with Arduino and Micropython. It is built with an ATSAMD51 microcontroller with wireless connectivity supported by Realtek RTL8720DN. Its CPU speed runs at 120MHz (Boost up to 200MHz). Realtek RTL8720DN chip supports both Bluetooth and Wi-Fi providing the backbone for IoT projects. The Wio Terminal is Highly Integrated with a 2.4” LCD Screen, there is an onboard IMU(LIS3DHTR), microphone, buzzer, microSD card slot, light sensor, and infrared emitter(IR 940nm). Specification Wio Terminal Main Chip Manufacturer Part Number ATSAMD51P19 Core Processor ARM® Cortex®-M4F running at 120MHz Memory 4 MB External Flash, 192 KB RAM Maximum Speed 200MHz External Flash 4MBytes Operating Temperature -40°C ~ 85°C (TA) LCD Screen Resolution 320x240 Display Size 2.4inch Drive IC ILI9341 Wireless Connectivity Manufacturer Part Number RTL8720DN KM4 CPU ARM® Cortex®-M4F @ 200MHz KM0 CPU ARM® Cortex®-M0 Wi-Fi 802.11 a/b/g/n 1x1, Dual Band 2.4GHz & 5GHz Bluetooth Support BLE5.0 Built-in Modules Accelerometer LIS3DHTR Microphone 1.0V-10V -42dB Speaker ≥78dB @10cm 4000Hz Light Sensor 400-1050nm Infrared Emitter 940nm Interface MicroSD Card Slot Maximum 16GB GPIO 40-PIN (Raspberry Pi Compatible) Supported Protocol SPI, I2C, I2S, ADC, DAC, PWM, UART(Serial) Grove 2 (Multifunction), for Digital, Analog, I2C, and PWM FPC 20-Pins USB Type-C Power & USB-OTG Operation Interface 5-Way Switch Power/Reset Switch User-defined button *3 Enclosure Mouting Built-in magnets and two mounting holes Dimension 72mm*57mm*12mm Materials ABS+PC Software Support Arduino MicroPython ArduPy AT Firmware Visual Studio Code CircuitPython ( How to run CircuitPython on Wio Terminal?) Grove - Wio-E5 Voltage Supply: 3.3V / 5V Power Output: Up to +20 dBm at 3.3V Working Frequency 868MHz / 915MHz Protocol LoRaWAN Sensitivity -116.5dBm ~ -136dBm Modulation Long Range , (G)FSK, (G)MSK and BPSK Current Only 60uA in sleep mode Size 20*40mm Working Temperature -40℃ ~ 85℃ Partlist Wio Terminal 1 Grove-Wio-E5 1 FAQ: if I add a Grove-Wio-E5 to my Wio Field Tester, will it work as WioHeliumMonitor? Yes, it will. You just need to update the wifi stack With Wio Terminal+ Wio Helium Monitor E5, you can monitor and alarm your Helium Hotspot as Paul used in the above video!