ESP32-S3 Development Board with 2.8" IPS LCD Display (240 x 320)

This board comes with an Xtensa 32-bit LX7 dual-core processor that operates up to 240MHz and has 16MB Flash, 8MB PSRAM and an SD card slot. It supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with an antenna, and you'll find UART, I2C and GPIO connections on the board with a USB-C port for power. On the back of the board, you'll find a colourful 2.8" IPS display with 262K colours, a wide viewing angle and a 240 x 320 resolution. There is also an MX1.25 2-pin connector for a 3.7V lithium battery, an RTC battery connector, and 2W 20 x 30 speakers are included. Click here for the touchscreen version. Please note: this board uses a tiny MX1.25 connector for LiPo power. Most LiPo batteries on the market (including ours) use a larger JST fitting. We do not yet stock batteries with an MX1.25 connector, however, you can customise your battery with one of our 1.25mm pitch cables to make a compatible battery yourself (assuming you have the ability, knowledge and tools to do this safely). If you want to source your own battery to fit inside the case, a battery size of 3.85 x 24 x 28 mm is recommended. Features

* Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency

* Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna

* Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM

* 2.8" LCD display, 240 x 320 resolution, 262K colour

* Adapting UART, I2C and some IO interfaces, full-speed USB port

* Speaker, QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc

* Supports accurate control such as flexible clock and multiple power modes to realise low power consumption in different scenarios

What's on Board

* ESP32-S3R8 Dual-core processor, up to 240MHz operating frequency

* 16MB Flash

* QST attitude sensor QMI8658C (6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer)

* RTC chip PCF85063 RTC chip

* PCM5101 audio decoder

* Amplifier chip

* Volume adjustment knob

* Battery recharge manager

* ME6217C33M5G Low dropout regulator, 800mA output (Max.)

* Onboard ceramic antenna

* IPEX1 connector and switching resistor Switching to use an external antenna via resoldering the resistor

* TF card slot Supports TF cards up to 16GB

* Battery power supply control button A relevant driver program is required

* RESET button

* BOOT button

* USB Type-C port

* 12PIN multi-functional pin header

* I2C header Connecting with internal chip, only supports the I2C peripherals and cannot be mapped to other functions

* UART header

* MX1.25 battery header MX1.25 2PIN connector, for 3.7V Lithium battery, supports charging and discharging

* RTC battery header for connecting rechargeable RTC battery

* Speaker header Comes with 8Ω 2W 2030 speaker

* Power indicator

* Charge indicator Lithium battery charge indicator lights up when charging, and off when fully charged (the light status is uncertain when the battery is not connected)

Resources

* Product Wiki

Package Contents

* 1x ESP32-S3 2.8" Capacitive Touch Display

* 1x SH1.0 12-pin Cable -100mm

* 2x SH1.0 4-pin Cable -100mm

* 1x 20 x 30mm Speaker