10.2" Four-Colour ePaper Display (G) with Driver HAT for Raspberry Pi

This jumbo panel is a 10.2" 960x640 ePaper display which supports four colours - red, yellow, black and white! It comes with a driver HAT for your Raspberry Pi, along with some demo programs in C and Python for coding inspiration. ePaper /displays are designed to replicate the appearance of ink on paper. Unlike regular displays, which lose their image when power is removed, ePaper displays are able to hold text and images indefinitely, even without power. ePaper screens are therefore ultra-low power, designed to have a wide viewing angle and additionally have limited reflection under sunlight. This particular 10.2" panel offers 170° viewing angles, a 960x640 resolution, four-colour support and a 27-second refresh time. Partial refresh is not supported (Waveshare don't mention this anywhere in their documentation). The HAT also includes a 9-pin connector to use with the included cable assembly, to allow you to use this with other development boards. Raspberry Pi, Arduino, ESP, STM and Jetson Nano examples are provided in the wiki. The onboard voltage translator allows it to be used with 3.3V or 5V MCUs. Raspberry Pi not included. Features

* 10.2" ePaper display with 960x640 resolution * Supports four colours: red, yellow, black, and white * Includes e-Paper Driver HAT for Raspberry Pi * Standard Raspberry Pi 40-pin GPIO header for direct mounting * No backlight; retains the last image even when powered off * Ultra-low power consumption, power only required during refresh * 170° viewing angles with low reflection in bright light * Full refresh time of approximately 27 seconds (no partial refresh support) * Onboard voltage level translator, compatible with 3.3V and 5V * 9-pin connector and cable for use with non-Raspberry Pi dev boards * SPI interface for use with ESP, Jetson Nano, Arduino, STM32 Specifications Size 10.2" Driver board size 65.00mm × 30.50mm Display size 215.52mm × 143.68mm Outline dimensions 224mm × 157mm × 1mm Operating voltage 3.3V / 5V (I/O level voltage must match supply voltage) Communication interface SPI Dot pitch 0.2245mm × 0.2245mm Resolution 960 × 640 Display colours Red, yellow, black, white Gray scale 2 Refresh time 27s Total refresh power <100mW (typ.) Operating temperature 0 to 40 °C Storage temperature -25 to 70 °C Resources

* Product wiki * Examples/demo code:

* Raspberry Pi * Arduino * ESP32 * Jetson Nano * STM32

* Driver HAT schematic * ePaper panel schematic Pinout PWR Power control pin BUSY Busy status output RST External reset, low active DC Data / command selection (high for data, low for command) CS SPI chip select, low active SCLK SPI SCK pin DIN SPI MOSI pin GND Ground VCC 3.3V / 5V Package Contents

* 1x 10.2" ePaper display (G) * 1x Driver HAT * 1x MX1.25 9-pin cable assembly * 1x Screw pack Raspberry Pi not included.