GSM/GPRS/GPS Shield for Arduino [Discontinued]

This GSM/GPRS/GPS Shield is an Arduino shield based on the Quad-band GSM/GPRS/GPS module SIM808. The shield is compatible with the Arduino UNO and Arduino Leonardo. A full product Wiki and user guide are available with instructions on how to use the board. The package contains the GSM/GPRS/GPS Shield, a GSM Antenna, a GPS External Antenna, Bluetooth Antenna and USB type A plug to micro plug cable. A power adapter is not included but can be bought separately here. Note: Arduino board not included! Features

* Arduino connectivity, compatible with UNO and Leonardo

* Onboard USB TO UART Converter CP2102 for UART debugging

* 5 x LEDs for indicating the module working status

* Onboard voltage level converter, supports both 3.3V and 5V systems

* SIM card slot for 1.8V/3V SIM card

* Baudrate auto-detection (1200bps ~115200bps)

* Bluetooth 3.0 - Supports data transferring through Bluetooth

* RTC with power supply interface

* Firmware upgradable via USB

* Control via AT commands (3GPP TS 27.007,27.005, and SIMCOM enhanced AT Commands)

* Supports SIM application toolkit: GSM 11.14 Release 99

* Operating voltage: 6 ~ 12V

* Operation temperature: -40 °C ~ +85 °C

* Storage temperature: -45 °C ~ +90 °C

GSM/GPRS

* Band

* GSM 850/EGSM 900/DCS 1800/PCS 1900 MHz

* Quad-band auto search

* Compliant to GSM phase 2/2+

* Emitting power

* Class 4 (2W @ GSM 850/EGSM 900 MHz)

* Class 1 (1W @ DCS 1800/PCS 1900 MHz)

* GPRS connectivity

* GPRS multi-slot class 12 (default)

* GPRS multi-slot class 1~12 (configurable)

* GPRS data feature

* Downlink speed: max 85.6kbps

* Uplink speed: max 85.6kbps

* Coding schemes: CS-1\CS-2\CS-3\CS-4

* Supports PAP (Password Authentication Protocol) for PPP connection

* Embedded TCP/IP protocol

* Supports PBCCH

* Supports CSD transmission speed: 2.4/4.8/9.6/14.4 kbps

* Supports USSD

* SMS

* Supports: MT/MO/CB/Text/PDU mode

* SMS storage: SIM card

* Audio

* Voice encode/decode mode: Half Rate\Full Rate\Enhanced Full Rate\Adaptive muti rate

* Supports echo cancellation

* Supports noise reduction

GPS

* Receiver type

* 22 tracking channels

* 66 acquisition channels

* GPS L1 C/A code

* Sensitivity

* Tracking: -165 dBm

* Cold starts : -148 dBm

* Time-To-First-Fix

* Cold starts : 30s (typ.)

* Hot starts : < 1s

* Warm starts: 28s

* Accuracy

* Horizontal position : <2.5m CEP

Package Contents

* 1x GSM/GPRS/GPS Shield (B)

* 1x GSM Antenna

* 1x GPS External Antenna (B)

* 1x Bluetooth Antenna

* 1x Power adapter US standard

* 1x USB type A plug to micro plug cable

What's on Board

1) SIM808 module 2) MIC29302 power chip 3) CP2102: USB TO UART converter 4) SMF05C: TVS diode 5) 1N5408: onboard rectifier 6) SIM808 functional pins 7) Arduino expansion connector 8) USB TO UART interface 9) DC power jack 10) GPS antenna connector 11) bluetooth antenna connector 12) Firmware upgrade interface 13) GSM antenna connector 14) SIM card slot 15) 3.5mm earphone/mic jack 16) GPS status indicator 17) CP2102 UART Tx/Rx indicator 18 NET indicator:

- Flashes fast when the module starts up

- Flashes slowly after GSM register succeed 19) Power indicator 20) Power switch 21) SIM808 control button: press the button and hold for 1s, to startup/shutdown the SIM808 22) Reset button 23) UART selection switch, select controlling the SIM808 via:

- CP2102

- UART pins of Arduino interface 24) SIM808 UART configuration:

- SIMTX: SIM808 UART TX

- SIMRX: SIM808 UART RX 25) IOREF power selection: configure the UART voltage level Resources

* Product Wiki and user Guide