Air Quality Kit with M5StampS3 (SEN55, SCD40) [Discontinued]

The Air Quality Kit with M5StampS3 is a low-power air quality monitoring device that provides detailed air quality insights. It has several components, including the SEN55 air quality sensor and the SCD40 CO2 sensor, which measure PM1.0, PM2.5, PM4, PM10 particles, temperature, humidity, VOC, and CO2 levels. It works with the StampS3 main controller and features 8M Flash memory for data processing and storage. The device includes a 1.54" e-ink display with a 200 x 200 resolution, offering a clear view of the data. This display retains the final data screen even during power outages, providing uninterrupted visualisation. To improve monitoring duration, the kit comes with a 600mAh battery and an RTC low-power power management circuit. This design allows the device to enter sleep mode and wake up on a schedule, conserving energy and extending battery life. The kit's firmware is preconfigured to upload data to M5's EZDATA cloud platform, which automatically creates monitoring pages for convenient remote access and data management. You can access air quality data anytime and anywhere via this cloud-based system. For flexible installation, the kit includes LEGO mounting holes, adhesive magnets, and four detachable mounting ears. This supports secure installation in various environments such as homes, schools, industrial facilities, and hospitals, providing continuous online air quality monitoring. Note: To enter download mode, press and hold the G0 button on the StampS3 before powering on, and release it after powering up.

Power On: You can power on the device by pressing the "WAKE" button or through the RTC-triggered IRQ signal for wake-up. After completing the wake-up signal, in the program initialisation, it is necessary to set the hold (G46) pin to a high level (1) to maintain power; otherwise, the device will re-enter sleep mode.

Power Off: To power off when not externally powered via USB, press the RST button. Alternatively, when running the program without external USB power, set HOLD (GPIO46) to 0 to achieve a power-off shutdown.

Lithium Battery Shipping: Due to courier restrictions, this product can only be shipped within the United Kingdom. With this item in your cart your shipping options will be limited and may cost more than our usual rates. Why?

Specifications

Resources Parameters

MCU StampS3 (ESP32S3FN8@8M Flash, 240Mhz, 2.4GHz Wi-Fi）

Screen GDEW0154M091

200 x 200@1.54"

SPI interface

Dpi: 184

1-bit Black/white display (grayscale:2)

Field of view size (mm):27.6 x 27.6

Point spacing (mm) 0.138 x 0.138

Refresh time (s) 0.82

Office brush time (s) 0.24

Resolution 200 x 200px

SEN55 I2C address: 0x69

SCD40 I2C address: 0x62

Environmental Detection Type PM1.0, PM2.5, PM4, PM10 particles, temperature, humidity, VOC and CO2 concentrations

RTC RTC8563

Battery 600mAh@3.7V

Button Key A(G0), Key B(G8), Start Button, Reset and Shutdown

Grove Interface HY2.0-4P

Buzzer Onboard passive buzzer

Fixed Structure Lego mounting holes, adsorption magnets and 4 M3 plug-in mounting ears

Operating Temperature 0-40°C

Product Size 72 x 56 x 24.1mm

Package Size 103 x 75 x 30mm

Product Weight 91.1g

Package Weight 119.3g

Resources

* Product Wiki

* Arduino IDE Tutorial

* UIFlow 2.0 Tutorial

Package Contents

* 1x Air Quality Kit

* 1x Instructions